Inconel X750 Strip
China Type:GH145/GH4145
German Type:NiCr15Fe7TiAl
French Type:NC15FeTNbA
Japan Type:NCF750
-
Inconel X750 Strip
Inconel X-750 Chemical composition:
Alloy
%
Ni
Cr
Fe
Nb
Co
C
Mn
Si
S
Cu
Al
Ti
Inconel X-750
Min.
14
5
0.7
0.4
2.25
Max.
70
17
9
1.2
1
0.08
1
0.5
0.01
0.5
1
2.75
Inconel X-750 Physical properties:
Density
8.28 g/cm3
Melting range
1393-1427°C
Inconel X-750 Alloy m inimum Mechanical properties in the room temperature:Alloy
Tensile strength
Rm N/mm2Yield strength RP0.2N/mm2
ElongationA5 %
Brinell hardness HB
Solution treatment
1267
868
25
≤400
Inconel X-750 Characteristic as below:
Inconel X-750 is a precipitation-hardenable alloy which has been used in applications such as high temperature structural members for gas turbines, jet engine parts, nuclear power plant applications, heat-treating fixtures, forming tools, and extrusion dies. The alloy is highly resistant to chemical corrosion and oxidation and has high stress-rupture strength and low creep rates under high stresses at temperatures up to 1500°F (816°C) after suitable heat treatment.
Inconel X-750 Machinability:
Conventional machining techniques used for iron based alloys may be used. This alloy does work-harden during machining and has higher strength and "gumminess" not typical of steels. Heavy duty machining equipment and tooling should be used to minimize chatter or work-hardening of the alloy ahead of the cutting.
Inconel X-750 Corrosion resistance:
Inconel X-750 has excellent resistance to chloride ion stress-corrosion cracking. It exhibits satisfactory resistance to numerous oxidizing environments. The alloy has similar corrosion resistance to alloy 600 in many media.
Inconel X-750 Application range and field:- Nuclear reactors
- Gas turbines
- Rocket engines
- Pressure vessels
- Aircraft structures