Supplier of nonferrous metal products:

 

 

 

 

 

Nickel Copper Titanium

Alloys

 

镍·铜·钛

Nickel,Copper,Titanium Alloys

上海灿虎实业有限公司

Shanghai Canhu Indusrty Co.,Ltd

 

    • Consumer hotline

    • 0086-21-62518269
    • 0086-13818436145
    • 0086-18221550917
    • 0086-13816618545
    • Service hours

    • Monday to Friday 9:30-18:30
    • WeChat QR code

PRODUCTS    NICKEL & NICKEL ALLOYS    Nimonic 75 SMLS Pipe

Nimonic 75 SMLS Pipe

收藏
  • Nimonic 75 Pipe

    Nimonic 75(UNS N06075)

    Material No.: (2.4951/2.4630)

    Chemical Composition:

    Alloy

    %

    C

    Cr

    Ni

    Ti

    Fe

    Cu

    Mn

    Si

    75

    Min.

    0.08

    18

    Balance

    0.2

           

    Max

    0.15

    21

    0.6

    0.5

    0.5

    1

    1

     

    Nimonic 75 Physical properties:

    Density

    8.37 g/cm3

    Melting point

    2450-2520°C

     

    Nimonic 75 minimum mechanical properties in the room temperature:

     

    Alloy

    Tensile strength

    Thermal conductivity

     

    Coefficient of thermal expansion

    Hardness

    HB

    Rm N/mm2

    W/m• °C

    μm/m/°C

    Nimonic 75(solution)

    1400-2210

    11.7

    11

    241

     

    Alloy 75 (UNS N06075) is a nickel-chromium alloy with good mechanical properties and oxidation resistance at high temperatures. Alloy 75 is most commonly used for sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures. Alloy 75 is also used in gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering.

     

    Availability

    Alloy 75 is available in Bar, Plate, Strip, Sheet, Wire, Tube, Rod, Forging Stock and Extruded Section. For all stock availability contact Sales.

     

    Specifications

    Rod, Bar, Wire and Forging Stock

    BS HR 5, BS HR 504, DIN 17752, AECMA PrEN2306, AECMA PrEN2307, AECMA PrEN2306, AECMA Pr EN2307, AECMA PrEN2402, ISO 9723, ISO 9724, ISO 9725

    Plate, Sheet, Strip

    BS HR 203, DIN 17750, AECMA PrEN2293, AECMA PrEN2302, AECMA PrEN2411, ISO 6208

    Pipe and Tube

    BS HR 403, DIN 17751, AECMA PrEN2294, ISO 6207

    Other

    DIN 17742, AECMA PrEN2308, Werkstoff Nr 2.4630, W. Nr 2.4951, UNS N06075, Nimonic 75 (tradename), MSRR 7104 and MSRR 7004, AFNOR NC 20T

     

    Typical Mechanical Properties Alloy 75

    Rupture Strength (1000 h)

    Temperature

    psi

    MPa

    760°C / 1400° F

    6000

    40

    815°C / 1500°F

    3500

    24

    870°C / 1600°F

    2200

    15

    925°C / 1700°F

    1500

    10

    980°C / 1800°F

    1200

    8

    (This material was Annealed)

Copper Contact
Nickel Contact
Titanium Contact
Nickel products
Copper products
Titanium products
本网站由阿里云提供云计算及安全服务 Powered by 五叶草互联